Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burbank, CA
Chimney repair in Burbank usually means working on a 1920s – 1950s clay tile flue inside a Spanish Colonial Revival or Tudor bungalow that has spent decades absorbing Santa Ana wind cycles and summer heat. The original mortar crowns crack, the clay tiles spall, and dampers rot from soot and moisture long before anyone notices a problem. Santa Ana Chimney Sweep has served Burbank since 2016, and we carry the repair materials most sweep-only crews don’t stock, including Gelco and Copperfield components. Call (855) 341-9658 when you need a repair crew that diagnoses the flue, not just the firebox.
Why Burbank Homes Are Different
Burbank sits in a hot, dry inland valley pressed against the Verdugo Mountains. That geography drives chimney work here in ways it doesn’t in coastal LA. Long dry summers bake the mortar crowns on older chimneys until hairline cracks open up. Then the fall Santa Ana winds arrive, stripping eucalyptus and pine debris from the hillside streets below the mountains and dropping it onto caps and into flues. By the time winter rains and cold snaps push homeowners to light fires, many chimneys are already compromised: wind-driven crown failure is often the first thing we find, not fire damage.
The housing stock adds another layer. Most of Burbank’s pre-war and post-war bungalows, built between 1920 and 1955, still have original masonry fireplaces with clay tile flues. Those tiles expand and contract with every burn cycle, and after 70 or 80 years they crack. Many of these homes have also been remodeled or expanded over the years, which means the chimney cap and flue liner no longer match the updated roofline. In the Rancho and Media District areas, the 1980s and later homes with factory-built metal flues present different issues: rusted caps, warped dampers, and creosote buildup that never got addressed because the fireplace was treated as decorative.
Styles & brands we work with
Our Main Burbank Services
Most Burbank homeowners reach out for two things: a thorough chimney sweep before the burn season, or dryer vent cleaning once they realize lint buildup is a fire hazard in its own right. Both are handled by the same crew.
Chimney Sweep in Burbank
A proper sweep in Burbank means more than running a brush up the flue. On the hillside-adjacent streets below the Verdugo Mountains, Santa Ana winds push eucalyptus leaves, pine needles, and grit past chimney caps all fall. We remove that debris, scrub creosote from the flue walls, and check the damper, crown, and cap while we’re there. Homes in the 91501 and 91502 ZIP codes with original clay tile liners need this before the first winter fire. Full details on our Chimney Sweep in Burbank page.
Dryer Vent Cleaning in Burbank
Dryer vents collect lint the same way chimneys collect creosote, and in Burbank’s dry summer air that lint is tinder. The 1950s bungalows in the flats often have long, convoluted dryer vent runs that trap buildup faster than newer construction. We pull the vent apart, brush and vacuum the full run, and verify airflow at the exterior termination. Many customers bundle this with a chimney sweep in the same visit. See our Dryer Vent Cleaning in Burbank page for pricing and scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Burbank
Chimney repair in Burbank is defined by the city’s 1920s – 1950s housing stock. We routinely open up chimneys in the hillside flats south of the Verdugo Mountains and find clay tile flues cracked from decades of thermal cycling, mortar crowns that have eroded in the dry heat, and dampers so soot-packed they’ll no longer open. Our Chimney Repair crew handles the full scope: caps, liners, flashing, and crowns, using Gelco and Copperfield parts sourced to match the original construction. If a flue is compromised, we fix it before it becomes a fire-safety or carbon monoxide problem.
Chimney Cap Installation
Signs you need it
You hear the wind drafting down the flue, find birds or nesting material inside the firebox, or see rain streaks staining the ceiling near the chimney chase.
What it costs in Burbank
Chimney cap installation in Burbank typically runs $150 – $350 depending on flue size and whether the cap is standard black galvanized, stainless, or a decorative copper model.
How we do it
We measure the flue opening, anchor the cap to the crown or flue tile with mechanical fasteners, and seal around the base so it holds through Santa Ana wind events.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, warped from years of Burbank sun, or missing entirely after a windstorm.
What it costs in Burbank
Replacing a damaged chimney cap in Burbank costs $150 – $350, with the higher end covering stainless or custom-fit copper caps on non-standard flue openings.
How we do it
We remove the old cap, clean the mounting surface, and install a correctly sized replacement with new hardware and a weatherproof seal.
Chimney Liner Installation
Signs you need it
An inspection shows cracked or missing clay tiles, or a previous sweep found the flue is no longer safe to use due to gaps in the liner.
What it costs in Burbank
Liner installation in Burbank runs $800 – $1,400 for a typical single-story bungalow, with the range driven by flue height, accessibility, and whether the old liner must be removed first.
How we do it
We measure the flue run, pull the new liner through the existing chase or rebuild the flue path as needed, then connect and seal the top plate and cap assembly.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling around the chimney, damp drywall in the attic near the chase, or visible rust and separation where the chimney meets the roofline.
What it costs in Burbank
Flashing repair in Burbank ranges from $200 – $500, depending on whether we’re patching a small section or replacing the full step and counter flashing around the chimney base.
How we do it
We lift the surrounding shingles or tile, remove the old flashing, install new step and counter flashing with proper overlap, and seal all seams with a high-temperature roofing sealant.
Chimney Crown Repair
Signs you need it
Visible cracks across the top of the chimney, chunks of mortar missing from the crown, or water pooling around the flue tile after rain.
What it costs in Burbank
Crown repair in Burbank typically costs $300 – $700, with the final number set by how much of the old crown must be chipped out and rebuilt.
How we do it
We chip away the deteriorated mortar, build a form for the new crown with proper slope away from the flue, pour the repair material, and finish it to shed water for the next 20-plus years.
What Chimney Repair Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Chimney cap installation or replacement | $150 – $350 |
| Chimney flashing repair | $200 – $500 |
| Chimney crown repair | $300 – $700 |
Do you replace clay tile liners rather than installing a metal liner?
In most Burbank bungalows we recommend a correctly sized stainless liner, because the original clay tiles are already cracked or missing. Rebuilding a clay tile flue means tearing out the existing masonry, which is rarely justified.
How long does chimney repair last in Burbank’s climate?
A proper crown repair or new liner should last 20 to 30 years in Burbank’s dry heat and wind, as long as the cap stays intact and the flashing is maintained. We use Gelco and Copperfield components specifically because they hold up to constant UV exposure better than hardware-store substitutes. Call (855) 341-9658 for a free estimate on any repair.
Brands We Service in Burbank
We install and specify Gelco, Olympia Chimney, Famco, and Copperfield components, and we keep common cap sizes and liner fittings on the truck for Burbank jobs. That means most repairs start and finish in one visit, not after a week waiting on a parts order. See our brands for the full material list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Chimney sweep (standard, one flue) | $200 – $500 |
| Dryer vent cleaning | $125 – $250 |
| Chimney cap installation | $150 – $350 |
| Chimney cap replacement | $150 – $350 |
| Chimney liner installation | $800 – $1,400 |
| Chimney flashing repair | $200 – $500 |
| Chimney crown repair | $300 – $700 |
In Burbank, prices push toward the upper end on hillside lots where scaffolding or roof access is tighter, and on older homes where multiple problems stack up: a cracked crown plus bad flashing plus a rusted cap is a common combination on pre-war bungalows. We quote a flat price before any work starts, so you know the number before we put a ladder against the house.
Neighborhoods We Serve in Burbank
We work across all four Burbank ZIP codes: 91523, 91526, 91501, and 91502. That covers the hillside streets below the Verdugo Mountains, the bungalow flats in the center of the city, and the newer construction along the 5 corridor toward the Media District.
- Rancho District
- Media District
- Magnolia Park
- Hillside streets below the Verdugo Mountains
- North Hollywood adjacent flats
Most Burbank jobs are scheduled within a few days to a week, with quicker turnaround during early fall before the burn season rush.
Service Area – Cities Near Burbank
Our Burbank crews regularly work the surrounding cities in the San Fernando Valley and Verdugo foothills. If you’re in a neighboring community, we likely already serve your street: Universal City, CA to the south, North Hollywood, CA to the west, Glendale, CA to the east, and Studio City, CA over the hill. Same crew, same materials, same flat-price quote.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burbank
Most Burbank appointments are scheduled within three to seven days. During September and October, when everyone calls before the first fire, lead time can stretch to two weeks. If you have an urgent issue like water coming through the ceiling near the chimney, we do everything we can to fit you in sooner.
Routine sweeping, cap replacement, or crown repair generally does not require a city permit in Burbank. Major structural rebuilds may, depending on scope. We’ll tell you during the estimate if your job crosses that line, and we’ll handle the paperwork if it does.
Yes. We cover 91523, 91526, 91501, and 91502, including the hillside streets under the Verdugo Mountains and the flats around Magnolia Park and the Media District. Call (855) 341-9658 to confirm your address and get a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Marcus Hampton"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Shannon Ziegler"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Roger Novak