Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Glendale, CA
Chimney repair in Glendale usually means dealing with 80-year-old brick, not just sweeping out creosote. The city’s hillside neighborhoods are filled with 1920s through 1950s Spanish Colonial and Tudor homes that still carry their original masonry fireplaces. Many were converted to gas logs decades ago, but the flues behind them were never relined. That means most of the work we do here is inspection and retrofit: opening up old fireplaces, scoping the flue with a camera, and deciding whether the masonry can be safely repaired or needs a HeatShield resurfacing or a DuraFlex liner. If you need a chimney company that can actually fix what it finds, call us at (855) 341-9658.
Why Glendale Homes Are Different
Glendale’s terrain shapes the work more than anything else. The Verdugo Mountains and San Rafael Hills wrap around the north side of the city, and the hillside ZIPs like 91207 and 91208 are packed with homes on steep slopes where a standard extension ladder cannot safely reach the flue. On those jobs, our technicians scope from a flat roof section or run a chimney camera up from the firebox. The climate matters too. Glendale is semi-arid, with hot, dry summers and cool, wet winters. Chimneys sit idle for months, then get heavy use from November through February. That thermal cycling opens hairline cracks in old mortar joints, and when rain arrives, water finds those cracks and works its way into the brick. On the flats north of the 134, the issue is often a different one: builder-grade 1920s fireplaces that were constructed without a proper clay-tile liner at all. That defect stays invisible until a camera inspection reveals it, and it is a defect that can turn a routine fireplace into a fire hazard.
Styles & brands we work with
Our Main Glendale Services
Glendale homeowners call us most often for two things: getting a fireplace back into safe working order, and getting the dryer vent cleaned before it becomes a fire hazard. Both are handled by the same crew.
Chimney Sweep in Glendale
In Glendale, a sweep is rarely just a brush job. Older hillside chimneys often have decades of soot baked onto the flue walls, and gas-converted fireplaces need their log sets and burners checked as well as the flue. We sweep the flue, inspect the cap and crown from the roof (or by camera where the slope makes roof access unsafe), and tell you plainly whether the chimney is safe to use. If the sweep turns up cracks, missing mortar, or a liner that was never installed, we can quote the repair on the same visit. See what a full Chimney Sweep in Glendale includes.
Dryer Vent Cleaning in Glendale
Dryer lint is one of the leading causes of house fires in L.A. County, and Glendale’s older homes often have long, twisting vent runs that trap lint quickly. In hillside homes, vents sometimes terminate on a roof or a hard-to-reach side wall, which makes DIY cleaning impractical. We clean the full vent run from appliance to termination, clear the lint trap housing, and check the exterior cap for the right screen and flap operation. This can be bundled with a chimney visit so one appointment covers both fire risks. Details are on our Dryer Vent Cleaning in Glendale page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Glendale
Chimney repair in Glendale is driven by the age of the housing stock and the wildfire code that governs the hillsides. Most of the repair calls we take here involve gas-converted fireplaces in pre-war homes whose flues were never relined for the change in fuel. A gas log set burns cooler than wood, which allows acidic condensation to eat at old mortar from the inside. Combine that with the thermal expansion of hot, dry summers followed by wet winters, and you get spalling brick, cracked crowns, and rusted dampers. Our full-service Chimney Repair team handles everything from a simple cap replacement to a full flue retrofit.
Chimney Cap Installation
Signs you need it
Water stains on the ceiling near the chimney, birds or squirrels getting down the flue, or a missing cap after a Santa Ana wind event.
What it costs in Glendale
Chimney cap installation in Glendale typically runs between $300 and $700, depending on flue size and whether a custom stainless cap is needed.
How we do it
We measure the flue opening, install a stainless or copper cap sized to the tile, and secure it with mechanical fasteners rated for Glendale’s wind exposure.
Chimney Liner Installation
Signs you need it
Flaking clay tiles, white staining on exterior brick, a persistent smoky smell even when the damper is closed, or a camera inspection that shows gaps in the existing flue.
What it costs in Glendale
Chimney liner installation in Glendale generally falls between $2,500 and $6,000, with steep-slope roof access adding to the labor portion.
How we do it
We measure the full flue run, specify a DuraFlex flexible liner matched to the appliance or fireplace, and pull it through from the roof or firebox, then reconnect the cap and crown.
Chimney Flashing Repair
Signs you need it
Water in the attic after rain, rust-colored drips down the chimney chase, or lifting, cracked sealant around the base of the stack.
What it costs in Glendale
Chimney flashing repair in Glendale typically costs between $400 and $1,200, varying with roof pitch and the condition of the surrounding shingles or tile.
How we do it
We cut back the old flashing, install new step flashing and counter-flashing with proper overlap, and seal the joint with a polyurethane-based sealant that holds up under Glendale’s UV exposure.
Chimney Crown Repair
Signs you need it
A crown with visible cracks, a dip that pools water, or spalling brick just below the crown line on the exterior stack.
What it costs in Glendale
Chimney crown repair in Glendale usually runs between $600 and $1,400, with a full crown rebuild at the upper end of that range.
How we do it
We remove the deteriorated surface, build a form with the proper overhang and drip edge, and pour a new crown with a Portland-based mix that includes an acrylic bonding agent.
What Chimney Repair Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Chimney cap installation | $300 – $700 |
| Chimney flashing repair | $400 – $1,200 |
| Chimney liner installation | $2,500 – $6,000 |
How often should a chimney be inspected in Glendale?
Once a year, even for gas-only fireplaces. Glendale’s freeze-thaw cycle is mild, but the summer heat and winter rain still work on old mortar, and a gas log set can hide liner damage that only a camera catches.
Do I need a permit for chimney repair in Glendale?
Most liner installations and cap replacements do not require a Glendale permit, but structural rebuilds or changes to the firebox may. We can tell you during the estimate whether your project falls into permit territory, and handle the paperwork if it does. Call (855) 341-9658 and we’ll walk you through it.
Brands We Service in Glendale
We specify professional-grade materials on every Glendale job, and we stock the common sizes locally so we’re not waiting on a warehouse. That means Gelco caps and dampers, Olympia Chimney liners and chase covers, Famco flashing, and Copperfield weather systems are available for same-week repair calls. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Chimney sweep | $150 – $300 |
| Chimney cap installation | $300 – $700 |
| Chimney cap replacement | $300 – $700 |
| Chimney liner installation | $2,500 – $6,000 |
| Chimney flashing repair | $400 – $1,200 |
| Chimney crown repair | $600 – $1,400 |
| Dryer vent cleaning | $100 – $250 |
Steep-roof access is the biggest price driver in Glendale. Homes in the Verdugo foothills often require rope-and-harness work or camera scoping from a flat roof, and that labor shows up in the quote. We write flat-price estimates before any work begins, so the number we confirm on the phone is the number on the invoice.
Neighborhoods We Serve in Glendale
We work across all of Glendale, from the historic hillside streets of Rossmoyne and the Adams Hill area to the mid-century tracts in the Verdugo Woodlands and the flats around the 134. Our crews know which neighborhoods have pre-war unlined fireplaces, and which are mostly newer construction with gas direct-vent fireplaces that still need cap and screen maintenance for wildfire code.
- Rossmoyne
- Adams Hill
- Verdugo Woodlands
- Sparr Heights
- Glenwood
Service Area – Cities Near Glendale
Santa Ana Chimney Sweep has served Glendale since 2016, and we cover the surrounding foothill communities on the same weekly routes. That includes Burbank, CA to the west, La Cañada Flintridge, CA to the north, and the L.A. neighborhoods of Echo Park, CA and Silver Lake, CA, where the housing stock runs into the same pre-war masonry and hillside access challenges we see in Glendale.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Glendale
Most Glendale neighborhoods are on our weekly route, and we can usually schedule an inspection within five to seven business days. Hillside homes in 91207 and 91208 sometimes take a little longer to book because we send a two-person crew for rope-access jobs. Call (855) 341-9658 to see what’s open this week.
Many hillside HOAs in Glendale require spark arrestors and screened caps as part of their fire-safety covenants, and some have rules about visible chimney work on the street-facing elevation. We can tell you what your HOA documents should say and match the cap or crown finish to the existing stack so it passes review.
Yes. A large share of Glendale’s pre-war fireplaces have been converted to gas logs, and those systems still need annual inspection of the log set, gas valve, damper clamp, and flue lining. We do not install new fireplaces or run new gas lines, but we inspect, clean, and repair the chimney side of any gas log system. Call (855) 341-9658 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Angela Wong"Something came loose about a month after the work. Called them, and they were back out the next day and fixed it at no charge. Didn't argue, didn't try to bill me for the trip."
— Adam Delaney"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Marcus Hampton