Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fontana, CA
Chimney repair in Fontana usually means one of two things: a cracked clay tile liner in a 1960s ranch home off Sierra Avenue, or a rusted metal firebox in a newer north-side subdivision. The Santa Ana winds that rake through the Cajon Pass push dust, palm fronds, and bird nests down flues all fall, and the first cold snap sends homeowners reaching for fires that haven’t been checked in a year. We handle the sweep, the camera inspection, and the repair as one job, not three. Call (855) 341-9658 when you’re ready to know what’s actually going on inside your chimney.
Why Fontana Homes Are Different
Fontana’s housing stock splits roughly along I-210. South and east of the freeway, in the 92335 and 92337 ZIP codes, you’ll find 1950s and 1960s single-story ranch homes with original masonry fireplaces and clay tile flues. Those liners have been heating and cooling for sixty years, and hairline cracks are common. What starts as a hairline crack widens under heat cycling, and by the time you see spalling or smell smoke backing into the living room, the flue is already compromised.
The newer subdivisions north of the 210, particularly in 92336, are a different animal entirely. Those homes have prefabricated metal fireboxes and factory-built chimneys that use different brush types and inspection protocols. A wire brush that’s fine on clay tile can scar a stainless factory flue. We stock both types of equipment on the truck, because in Fontana you can work on a 1962 masonry chimney in the morning and a 2015 factory-built unit in the afternoon.
The Santa Ana wind corridor is the other factor. Those winds don’t just make for hazardous driving on the 15 – they strip debris off roofs, overhangs, and the foothills into the Cajon Pass, and a lot of it ends up on top of chimneys. We routinely pull palm fronds, tumbleweed, and bird nests out of flue caps after a wind event. A blocked flue in a home with an aging clay liner isn’t just inefficient; it’s a carbon monoxide risk that compounds every time the wind blows.
Styles & brands we work with
Our Main Fontana Services
Two services account for most of the calls we take from Fontana homeowners. Here’s what each one involves in your city.
Chimney Sweep in Fontana
A sweep in Fontana is about more than creosote removal. Because fireplaces sit idle through the hot, dry summer months, birds, rodents, and wind-blown debris settle into flues that get zero use from May through October. When the first cold snap hits in November, that material is still sitting there. We remove it, inspect the flue with a camera, and tell you plainly whether the liner is safe to burn or needs attention. If you’re in a 1950s – 1970s ranch with an original clay tile flue, the inspection matters as much as the sweeping. Full details are on our Chimney Sweep in Fontana page.
Dryer Vent Cleaning in Fontana
Lint accumulation in dryer vents is one of the leading causes of house fires in the inland Empire, and Fontana’s hard water and frequent dust events mean vents here clog faster than in coastal cities. We clean dryer vents as a standalone service or bundle them with a chimney sweep during the same appointment. If you’re already having us out for the fireplace, adding the dryer vent costs less than a separate trip and eliminates a second fire risk in the same visit. See Dryer Vent Cleaning in Fontana for specifics.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Fontana
Chimney repair in Fontana is driven by the age of the housing stock and the heat cycling those original clay tile liners have endured. In the 92335 and 92337 ZIP codes, we regularly find liners with vertical cracking, deteriorated mortar joints between tiles, and crowns that have lost their ability to shed water. These aren’t cosmetic issues – a cracked liner allows heat and carbon monoxide to reach combustible framing, and a failed crown lets water into the chimney structure year-round. If you think your chimney has a problem, the fastest way to know is a camera inspection, not guesswork. Chimney Repair work starts with seeing what’s inside the flue, and every recommendation we make comes with photos you can review yourself.
Chimney Crown Repair
Signs you need it
You’ll see cracking, spalling, or missing chunks of the concrete crown on top of your chimney, and water stains on the ceiling near the fireplace are a common second sign.
What it costs in Fontana
Chimney crown repair in Fontana typically runs $650 – $1,100 depending on crown condition and whether the weather has already begun to damage the flue below it.
How we do it
We remove the deteriorated crown material, build formwork for a proper overhang and drip edge, pour a new weather-resistant crown, and seal it with a flexible elastomeric coating that handles Fontana’s heat and wind.
Chimney Liner Installation
Signs you need it
Camera inspection shows cracked clay tiles, missing mortar joints between tiles, or you’re experiencing smoke backup and an unusual odor from the fireplace.
What it costs in Fontana
Chimney liner installation in Fontana runs $2,250 – $4,800, with the range driven by flue length, liner material, and whether the existing tiles create rough clearances that slow the pull.
How we do it
We size the flue, inspect the smoke chamber, and pull a DuraFlex or Copperfield stainless liner through the existing chimney, insulate it where code requires, and reconnect the appliance with a proper tee and cap.
Chimney Flashing Repair
Signs you need it
You have a leak that shows up as water staining on the ceiling around the chimney, especially after heavy rain, and the metal flashing where the chimney meets the roofline is lifted, corroded, or pulling away.
What it costs in Fontana
Chimney flashing repair in Fontana typically costs $450 – $900 depending on whether we’re sealing a small gap or replacing the full step, counter, and apron flashing.
How we do it
We cut back the old flashing, install new step flashing along each side, counter-flash into the mortar joints, and seal everything with a high-temperature roofing sealant, then test with water to confirm the leak is gone.
What Chimney Repair Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Crown repair | $650 – $1,100 |
| Flashing repair | $450 – $900 |
| Liner installation | $2,250 – $4,800 |
How long does chimney repair take in Fontana?
Crown and flashing repairs are usually done in a single day. A full liner installation typically takes one to two days, depending on flue height and whether we need to break out deteriorated clay tiles first.
Do I need a permit for chimney repair in Fontana?
Most liner installations and crown repairs fall under routine maintenance and don’t require a permit in Fontana, but if structural masonry work is needed, we’ll advise you and handle the permit process before work begins.
Brands We Service in Fontana
We stock and install parts from Olympia Chimney, Famco, Copperfield, and DuraFlex on our trucks, which means most Fontana repairs don’t wait on a distributor shipment. Caps, liners, flashings, and masonry sealants are ready same-day. Learn more about our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Chimney Sweep | $160 – $220 |
| Dryer Vent Cleaning | $100 – $160 |
| Chimney Cap Installation | $280 – $450 |
| Chimney Cap Replacement | $300 – $480 |
| Chimney Crown Repair | $650 – $1,100 |
| Chimney Flashing Repair | $450 – $900 |
| Chimney Liner Installation | $2,250 – $4,800 |
In Fontana, prices get pushed up by flue height on two-story runs, heavy creosote buildup that slows the sweep, and access issues like steep roofs in the foothill-adjacent neighborhoods. Before we start any job, you get a flat quote for the work we’ll do that day – no surprises when the invoice comes.
Neighborhoods We Serve in Fontana
We work throughout Fontana, from the older ranch blocks near downtown to the newer subdivisions north of Summit Avenue. We’re typically able to schedule most Fontana appointments within the same week, and we keep our route through the city organized by ZIP so we can run multiple stops on one day without long wait times.
- Downtown Fontana (92335)
- Southridge (92337)
- Summit Heights (92336)
- Seville / Citrus Heights (92335)
- Northgate (92336)
- West End (92331)
Service Area – Cities Near Fontana
Santa Ana Chimney Sweep serves Fontana and the surrounding San Bernardino County communities. If you’re in Bloomington, CA, Rialto, CA, Glen Avon, CA, or Pedley, CA, we’re on the same route and can often combine trips with other nearby stops to keep your appointment on schedule.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fontana
Most Fontana appointments are scheduled within the same week, and we route jobs by ZIP so multiple stops happen in one day rather than spread across several visits. If you have an urgent issue like water coming through the ceiling near the chimney, tell us when you call and we’ll prioritize the visit.
Some Fontana HOAs, particularly in newer north-side neighborhoods, have rules about visible chimney caps and exterior material changes. We’re familiar with the common HOA requirements in the area and can help you pick a cap or crown finish that meets association standards before work begins.
Yes. If you’re in Fontana and want a chimney sweep and dryer vent cleaning done at the same time, we’ll bundle them into one appointment and one trip. It’s the most efficient way to address both combustion vent systems in your home, and it costs less than booking them separately.
If you have a chimney that hasn’t been checked in years, a fireplace that’s been smoking back into the house, or a dryer vent you suspect is clogged with lint, call (855) 341-9658 for a free estimate. We’ll tell you what’s wrong, show you the camera footage, and fix it without sending you to a second contractor.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Something came loose about a month after the work. Called them, and they were back out the next day and fixed it at no charge. Didn't argue, didn't try to bill me for the trip."
— Adam Delaney"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Marcus Hampton"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Shannon Ziegler