Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Fontana
A chimney sweep in Fontana typically runs $149 – $289 for a standard open fireplace, and the job takes 45 – 90 minutes once we’re on site. The real question in Fontana isn’t whether your chimney needs attention, it’s whether it needed attention before the first cold snap. We serve all Fontana ZIP codes, 92334 through 92337, and we know exactly what these flues deal with after a Santa Ana wind event. Call (855) 341-9658 and we’ll get you on the schedule before your first fire of the season.
Why Santa Ana Chimney Sweep Is Fontana’s Preferred Chimney Sweep Company
Fontana homeowners call us because we show up knowing what to expect before we climb the ladder. The post-war ranches across 92335 and 92337 still have their original clay tile liners, and those liners don’t fail loudly. They crack slowly, over years of heat cycling, and the only way to catch the problem before it becomes a carbon monoxide risk is a camera inspection. We do that as part of our standard work when the home’s age calls for it.
Allen Becerra built our Chimney Sweep operation around the idea that a sweep should tell you the truth about what’s in the flue, with the camera footage to prove it. “If I wouldn’t burn in my own fireplace, I’m not telling you to,” that’s the standard here. You won’t get a hard-sell liner replacement from our techs. You’ll get a straight answer: sweep it now, reline it eventually, or wait and monitor.
We’re based in Santa Ana, not Fontana, and we don’t pretend otherwise. What we bring to Fontana is specialized equipment and a service roster most local sweeps don’t carry, including HeatShield resurfacing and DuraFlex liner installation. When a Fontana job needs more than a brush, we can often fix it the same trip instead of passing you to a second contractor.
Styles & brands we work with





Chimney Sweep Services in Fontana
Chimney Sweep Services in Fontana mean more than removing creosote here. Every fall, the Santa Ana winds rake through the Cajon Pass and push dust, palm fronds, tumbleweed, and bird nesting material down thousands of flues across the city. A chimney that was clean in April can be fully blocked by November, before the fireplace has been lit once. That’s why our default recommendation for Fontana homes is a pre-season sweep, not a mid-winter emergency call.
A standard open fireplace sweep in Fontana runs $149 – $229, depending on flue condition and accessibility. That includes our drop cloths, HEPA-filtered vacuum, and the brush work from the firebox up. Wood stove flues run slightly higher, $189 – $289, because they load creosote faster and need a more aggressive mechanical sweep.
Level 1 and Level 2 Inspection
A Level 1 inspection in Fontana runs $99 – $149 and covers the accessible portions of your chimney when nothing has changed since the last sweep. If you’ve just bought a home in 92336 or 92337, or if you suspect wind-driven debris or liner damage, you want a Level 2, which runs $249 – $399. That’s a camera run through the full flue length, giving you photo documentation of every crack, gap, or blockage.

Creosote and Soot Removal
First-degree creosote comes out with a standard brush. Third-degree, the hard tar glaze that builds in wood stove flues that run daily as primary heat, doesn’t. In rural Fontana properties where a wood stove heats the whole house, we see glazed creosote in February and March that a basic sweep can’t budge. We use rotary loop systems with steel heads for that work.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cleaning in Fontana
Chimney Cleaning in Fontana is a seasonal necessity, not a once-a-decade checkbox. The Inland Empire’s hot, dry summers mean fireplaces sit dormant for seven or eight months, and that’s exactly when animals and debris move in. Squirrels, starlings, and palm fronds don’t care that your flue was clean in March. By the first cold snap in late October or November, we routinely pull full nest structures from Fontana chimneys.
A standard fireplace cleaning in Fontana costs $149 – $229, and we typically finish in under an hour. That price includes the sweep, the inspection, and a clean-up with our HEPA vacuum so your living room looks the way we left it, except cleaner. If we’re also cleaning your dryer vent on the same visit, the bundled price drops by $40 – $60 off the combined total.
Annual Sweep Scheduling
We tell Fontana homeowners the same thing every fall: book your annual sweep in September or early October. A fireplace that sits idle all summer collects whatever the wind brings, and the first burn always pushes the worst of it against the flue walls. Our Chimney Sweep in Fontana schedule fills on the first cold weekend, and mid-January appointments come with a two-week wait.
Fireplace Cleaning for Older Ranch Homes
In the 1960s single-story homes south of Foothill Boulevard and around Jurupa Hills, we work with original masonry fireboxes that have seen decades of use. These aren’t quick jobs. We lay extra drop protection, inspect the firebox for spalling brick, and we’re careful not to push debris into ash dumps that were never designed for aggressive modern cleaning tools.
Trusted Brands We Service in Fontana
We name the materials we use, and that matters in Fontana. When a clay tile liner has cracked and a homeowner needs more than a sweep, we specify HeatShield for resurfacing as our go-to Gelco repair in Fontana because it’s a documented, product-backed alternative to a full teardown. When an older Fontana home needs a new liner, we stock DuraFlex flexible systems that fit irregular flues without demolition. We also carry Olympia Chimney caps and Famco parts for prefab fireplaces in the newer north-side subdivisions. These aren’t hardware-store substitutes. We order direct from our suppliers, we know the spec sheets, and we’ll show you exactly what we’re putting into your chimney and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Fontana Homes
- Wind-blown flue blockage after Santa Ana events. Palm fronds, tumbleweed, and bird nests pack into flue tops during windstorms. Homeowners mistake the resulting smoke backup for a damper problem, and the real fix is a sweep plus a proper chimney cap.
- Hairline cracks in original clay tile liners. The 1950s – 1970s ranch homes across 92335 and 92337 have clay liners that crack from decades of heating and cooling. Without a camera inspection, you won’t know until carbon monoxide is the first symptom.
- Third-degree creosote in wood stove flues. Rural Fontana properties that burn wood as primary heat build the hard, glassy tar glaze that standard brush sweeps won’t remove. A rotary loop with steel heads is the only reliable method.
- Prefab fireplaces in north Fontana needing different methods. The factory-built metal chimneys in 92336 subdivisions take a specific brush size and inspection protocol. Using masonry chimney tools on a prefab system causes damage, and we’ve seen the aftermath.
Pricing for Chimney Sweep in Fontana, CA
A standard fireplace sweep in Fontana runs $149 – $229. Wood stove flues run $189 – $289 because of heavier creosote loading and more demanding brush work. Level 1 inspections run $99 – $149, Level 2 camera inspections run $249 – $399. If we add a chimney cap after a sweep, caps run $89 – $189 installed depending on size and material. These are flat prices agreed on the phone before we arrive. We don’t add fuel surcharges for the drive from Santa Ana, and we don’t upsell a liner on a flue that doesn’t need one. Call (855) 341-9658 for an exact quote. Estimates are free.
We Also Serve Cities Near Fontana
If you’re in Bloomington, Rialto, Glen Avon, or Pedley, we’re already in your area regularly. The drive from Santa Ana covers the whole western Inland Empire, and many of our Fontana jobs are scheduled back-to-back with nearby cities. Same crew, same equipment, same flat pricing. Fontana is our anchor for this corridor, but we don’t draw a line at the city limits.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Fontana
Two reasons. The Santa Ana wind corridor pushes debris into flues every fall, so a chimney can block before it’s ever been lit. And Fontana’s wood stoves that run as primary heat in rural properties build creosote far faster than occasional-use fireplaces. We recommend every 6 – 12 months in Fontana, with more frequent service if you burn daily.
If your home still has its original clay tile liner and hasn’t had a Level 2 inspection in the last five years, you need one before the first burn. Hairline cracks from heat cycling are invisible from the top or bottom, and a camera run is the only way to see them. We include this recommendation for most homes built before 1980 in 92335 and 92337. Call (855) 341-9658 and we’ll set it up.
Call us before you light a fire. If debris is packed into the flue top, burning pushes smoke and carbon monoxide into the house. We’ll pull the blockage, sweep the flue, and install a chimney cap if you don’t have one, which stops the same thing from happening in the next windstorm.
Yes. Standard brush sweeps don’t remove third-degree creosote, the hard tar glaze that forms in heavily used wood stove flues. We use rotary loop systems with steel heads that physically grind the glaze off the flue walls. This is specialized work, and it runs $189 – $289 in Fontana, depending on flue length and severity.
Yes. Factory-built chimneys use specific brush sizes and inspection protocols, and using masonry tools on them causes damage. Our techs carry separate equipment for prefab systems and check for warped panels, loose connections, and rust, which are the failure points these systems have in Fontana’s dry, hot climate. Call (855) 341-9658 if you’re in 92336 and unsure what type of chimney you have.
Written by Allen Becerra, Owner at Santa Ana Chimney Sweep, serving Fontana and the Inland Empire since day one.