Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Temple City, CA
Most chimney work in Temple City isn’t about soot, it’s about time. The 91780 ZIP is full of post-war ranch homes built between the 1940s and 1960s, and their original brick fireplaces have been sitting mostly unused for decades. That means our chimney repair calls here usually start with a cracked crown, a rusted damper, or a flue that was never properly lined, not a fireplace that gets burned every weekend. If you need an honest look at what’s actually wrong with your chimney, call Santa Ana Chimney Sweep at (855) 341-9658.
Why Temple City Homes Are Different
Temple City’s housing stock is almost entirely single-story ranch and tract homes on compact lots, many still on raised foundations. The fireplaces in these houses were built with 1940s and 50s red brick and clay tile, and a lot of them were originally constructed with unlined masonry flues or a thin mortar parge that has since crumbled. Add in the San Gabriel Valley’s warm, dry climate, and you get a specific pattern: fireplaces that get a few burns in December and January, then sit cold for the rest of the year while winter rain works its way into the brick.
The moisture is the real problem in Temple City. Rain soaks into unlined masonry, crowns crack from decades of thermal expansion, and birds find their way into flues nobody has opened since the Reagan administration. We also see Santa Ana wind events push palm fronds and eucalyptus litter onto caps and into chase tops. And because lots are tight, chimneys frequently sit between neighboring roofs, which means access is trickier and staging has to be planned around fences and property lines.
One thing we run into constantly in Temple City: fireplaces converted to gas logs years ago. The flue was often left as-is, meaning the homeowner assumes everything is fine because they don’t burn wood. But a gas log set still produces exhaust that needs a sound flue, and an old unlined masonry chimney doesn’t care what fuel you burn. It still leaks, it still crumbles, and it still needs repair.
Styles & brands we work with
Our Main Temple City Services
Most Temple City homeowners call us for one of two things: a chimney sweep on a fireplace that hasn’t been touched in years, or dryer vent cleaning in a laundry room that’s been ignored even longer. Both are combustion-vent safety issues, and both are services our crew handles regularly here.
Chimney Sweep in Temple City
In Temple City, a sweep usually starts with a flue that’s been cold for a long time. We’re not just removing creosote from heavy wood burning; we’re clearing out bird nests, palm litter, and the crumbled mortar that falls into the smoke chamber, then running a camera up the flue to check what’s happening inside. Many ranch-era fireplaces in 91780 were never lined properly, and a sweep often turns into a conversation about what the camera shows. For the full breakdown of what a sweep includes here, see Chimney Sweep in Temple City.
Dryer Vent Cleaning in Temple City
Dryer vents in Temple City’s older homes are often original to the house, which means decades of lint packed into a foil or rigid duct that’s too long and bends too many times. Lint is a leading cause of house fires, and a clogged vent also makes your dryer run hotter and longer than it should. We clean dryer vents as a standalone service or bundle them with a chimney visit so one trip covers both combustion-vent systems. Details are on Dryer Vent Cleaning in Temple City.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Temple City
Chimney repair in Temple City is usually about undoing sixty years of weather on a chimney that was built before modern lining standards existed. The original brick and clay tile fireplaces in these 1940s and 50s ranch homes were often constructed without a proper flue liner, and the mortar crowns have been exposed to San Gabriel Valley rain for as long as the house has stood. What starts as a “cleaning” call often turns out to be a repair job: a crown that’s cracked through, flashing that’s separated from the roof, or a flue that needs a liner installed before it can safely handle any fuel, including gas logs. That’s why we stock professional-grade materials like Gelco, Olympia Chimney, and Copperfield components, and why we handle Chimney Repair from the first camera inspection to the final cap install, no second contractor required.
Chimney Cap Replacement
Signs you need it
Rust staining down the chase or brick below the cap, water inside the firebox after rain, or a cap that’s visibly bent, missing, or shifted out of place.
What it costs in Temple City
Replacement typically runs $185 to $350 for standard galvanized or stainless caps, with copper caps from $350 to $600 depending on flue size.
How we do it
We measure the flue tile, remove the old cap and any rusted fasteners, and install the replacement with a proper mechanical connection, not just sealant.
Chimney Crown Repair
Signs you need it
Cracks visible in the mortar crown from the ground or roof, spalling brick faces below the crown, or water drips inside the firebox after storms.
What it costs in Temple City
Repairs run $150 to $450 for crack filling and resurfacing; a full crown rebuild costs $600 to $1,200 depending on size and access.
How we do it
We clean and prep the existing crown surface, apply a flexible sealant or rebuild the crown with proper slope and drip edge so water sheds away from the flue.
What Chimney Repair Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Chimney cap replacement | $185 – $600 |
| Chimney crown repair | $150 – $1,200 |
| Chimney flashing repair | $300 – $800 |
Flashing repair figures follow the same local pattern: $300 to $800 depending on roof pitch and how much surrounding roofing material needs to be lifted. Homes on Temple City’s compact lots can run slightly higher when access means ladders over patios or between close-set roofs.
Can a cracked chimney crown really cause damage in Temple City?
Yes. A cracked crown lets winter rain into the masonry, and in Temple City’s clay-heavy soil and warm climate, that trapped moisture causes spalling, flue deterioration, and eventually structural problems. Repair is far cheaper than a rebuild later.
Do gas log chimneys need repairs too?
Yes, gas logs produce acidic exhaust that attacks old mortar just like wood smoke, and many Temple City conversions left original unlined flues in place. Call (855) 341-9658 for a camera inspection, free with any repair estimate.
Brands We Service in Temple City
We install and service components from Gelco, Olympia Chimney, Famco, and Copperfield, and we keep common Temple City parts stocked on our trucks, including caps, dampers, and flashing materials. That means most repair jobs are done in one visit, not two. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| Chimney sweep | $175 – $300 |
| Chimney inspection with camera | $100 – $250 |
| Chimney cap replacement | $185 – $600 |
| Chimney crown repair | $150 – $1,200 |
| Chimney flashing repair | $300 – $800 |
| Chimney liner installation | $2,500 – $5,000 |
| Dryer vent cleaning | $130 – $225 |
In Temple City, prices get pushed up by access issues: chimneys tucked between two neighboring roofs, raised foundations that add ladder height, and the extra time required to set up on compact lots. We give you a flat price before any work starts, and nothing gets recommended unless we can show you the problem on camera.
Neighborhoods We Serve in Temple City
We work throughout Temple City and the 91780 ZIP, from the older tract pockets south of Las Tunas Drive to the ranch-home streets up against the Arcadia border. Our typical response window for Temple City appointments is two to five business days, depending on season.
- North Temple City near Live Oak Park
- East Temple City along Temple City Boulevard
- West Temple City near Rosemead Boulevard
- South Temple City near Longden Avenue
Service Area – Cities Near Temple City
In addition to Temple City, our crews work throughout the western San Gabriel Valley. We regularly serve North El Monte, CA, Rosemead, CA, San Gabriel, CA, and Arcadia, CA. If your home is in one of these cities, the same pricing and same-day camera inspection standards apply.
Serving Temple City, CA — Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Temple City
Yes. We provide free estimates for all chimney repair and liner work in Temple City. A camera inspection is included with any repair quote so you can see exactly what we’re recommending and why.
Most repairs like caps, crowns, flashing, and liner installation don’t require a permit. If a job does trigger city requirements, we can advise you on the process and what documentation is needed before work begins.
Most cap, crown, and flashing repairs are completed in one visit of two to four hours. Liner installations usually take a full day. We’ll confirm the timeline before scheduling so you know what to expect.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Angela Wong"Something came loose about a month after the work. Called them, and they were back out the next day and fixed it at no charge. Didn't argue, didn't try to bill me for the trip."
— Adam Delaney"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Marcus Hampton