Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Lomita, CA
Chimney repair in Lomita usually means one of two things: a flue that has sat unused for years and now needs a liner or cap, or masonry joints that have opened up after decades of South Bay sun and Santa Ana wind. Most of the fireplaces we see here were built with the house, between the 1940s and early 1960s, and many have never been relined. That is not a problem to panic over, but it is a problem to address before the first fire of the season. If you have a chimney in Lomita that smokes, leaks, or has not been looked at in years, call Santa Ana Chimney Sweep at (855) 341-9658 and we will tell you exactly what you are working with.
Why Lomita Homes Are Different
The chimney work we do in Lomita is shaped by two things: the age of the housing stock and the way people actually use their fireplaces here. Most single-family homes in the 90717 zip code are post-war stucco-and-frame tract builds from roughly the 1940s to early 1960s. That means original brick or tile-faced hearths, masonry chimneys, and mortar joints that have been expanding and contracting in the dry Mediterranean climate for sixty-plus years. Lomita rarely gets a hard freeze, so the damage we see is not freeze-thaw spalling the way it is in the mountains. It is slow, steady drying: crown hairline cracks that widen over a decade, flashing that loosens as framing settles, and tile flues that look fine from the outside but have cracked from repeated heating and cooling cycles nobody thought about for twenty years.
The second factor is seasonal use. Fireplaces in Lomita get fired up during short winter cold snaps, then ignored for months. Creosote from those brief, low-temperature burns sits and glazes. During the long dry season, uncapped flues collect leaves, twigs, and bird nesting from the sycamores and eucalyptus that line the older neighborhoods. Santa Ana wind events push debris deep into the flue. By the time a homeowner calls us, usually after a smoky fire or a home inspection flagged something, there is often years of material in the chimney that has never been disturbed. That is the Lomita pattern.
Styles & brands we work with
Our Main Lomita Services
Most Lomita homeowners reach out for one of two reasons: a chimney that has not been swept in years and needs a full inspection, or a dryer vent that has never been cleaned and is backing up lint. Both are fire-safety issues, and both are covered by the same crew.
Chimney Sweep in Lomita
A proper sweep in Lomita almost always starts with removing nesting material and dry debris that has blown into the flue, because uncapped chimneys are the rule here, not the exception. We then remove the creosote and soot that have glazed onto the flue walls during sporadic winter burns. The job includes a camera inspection so you can see the flue condition yourself before any repair is recommended. If your fireplace has not been used in years and you want to start burning again, this is the first step. Learn more about what is included on our Chimney Sweep in Lomita page.
Dryer Vent Cleaning in Lomita
Dryer vents in Lomita’s older homes are often short runs, but they collect lint just the same, especially where the vent exits through a wall or roof on the Pacific Coast Highway corridor townhomes and apartments. Lint buildup restricts airflow, makes the dryer work harder, and is a leading cause of house fires. We clean the full vent run from the dryer connection to the exterior termination and report what we find. Since the same appointment can cover a chimney sweep and a dryer vent, many homeowners bundle both. Details are on the Dryer Vent Cleaning in Lomita page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Lomita
Chimney repair in Lomita is most often about age, not abuse. Homes built in the 1940s through early 1960s still have their original flue tiles, caps, and flashing, and those materials have been quietly failing for decades. The dry South Bay climate and occasional Santa Ana winds speed up crown deterioration, and a fireplace that sits unused for years hides the damage until smoke backs up into the living room or water stains appear on the ceiling. That is the specific problem we solve: identifying exactly what has failed on an older Lomita chimney and repairing it with professional-grade materials, not hardware-store substitutes. The full scope of repairs we handle is covered on our Chimney Repair page.
Chimney Cap Installation
Signs you need it
Visible debris, nesting material, or water staining at the top of the chimney, or an open flue that has never been capped.
What it costs in Lomita
Chimney cap installation in Lomita typically runs $150 to $350 depending on cap size and flue configuration.
How we do it
We measure the flue opening, select a properly sized cap from the Copperfield or Gelco lines we carry, and secure it to the flue with mechanical fasteners so it stays put in high winds.
Flashing Repair
Signs you need it
Water staining on the ceiling near the roofline, dampness around the chimney, or visible gaps or rust where the chimney meets the roof.
What it costs in Lomita
Flashing repair in Lomita typically ranges from $300 to $800, depending on how much of the existing flashing must be removed and replaced.
How we do it
We cut back the shingles or roof material at the penetration, remove the old flashing, install new step or continuous flashing with proper counterflashing, and seal the assembly against Lomita’s dry season and occasional heavy winter rain.
Chimney Liner Installation
Signs you need it
Fractured or missing flue tiles found during a camera inspection, smoke smell in walls, or a report that the flue is no longer safe to vent a fire.
What it costs in Lomita
Chimney liner installation in Lomita typically ranges from $2,500 to $5,500, depending on flue length, access, and liner type.
How we do it
We size a DuraFlex flexible liner to the flue dimensions, insulate where local code requires it, and pull the liner through from the top with a connection to the appliance or fireplace at the bottom, leaving a properly terminated cap and draft.
Chimney Crown Repair
Signs you need it
Hairline or visible cracks across the concrete crown at the top of the chimney, crumbling mortar at the crown edge, or water intrusion inside the flue.
What it costs in Lomita
Chimney crown repair in Lomita typically runs $750 to $1,500, depending on crown size and whether a full recast is needed.
How we do it
We remove the failing crown material, check the underlying masonry, and recast the crown with a proper concrete mix and a drafted overhang that sheds water away from the flue, rather than pooling it around the liner.
What Chimney Repair Costs in Lomita
| Item | Typical range in Lomita |
|---|---|
| Chimney cap installation | $150 – $350 |
| Flashing repair | $300 – $800 |
| Chimney crown repair | $750 – $1,500 |
| Chimney liner installation | $2,500 – $5,500 |
Do I need a new liner if I never use the fireplace?
Not automatically. A liner is only required when the existing flue is damaged to the point of leaking smoke or heat into the house, or when an appliance is being vented through it. We will not recommend one without showing you the camera footage. Call (855) 341-9658 if you want a straight answer.
Can repair wait until next year?
Some items can, like a crown hairline crack that has not yet let water into the house. Flashing leaks and damaged liners should not wait, because they get more expensive the longer they sit. We will tell you plainly what is urgent and what is not, and you can decide.
Brands We Service in Lomita
We specify and install professional-grade chimney components from Copperfield, Gelco, Olympia Chimney, and Famco. Parts are sourced from our supply lines and arrive ready for the specific flue dimensions we measured. Most cap and flashing jobs in Lomita are completed without waiting on backordered hardware. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Lomita, CA
| Service | Typical range in Lomita |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney cap installation | $150 – $350 |
| Chimney cap replacement | $200 – $450 |
| Flashing repair | $300 – $800 |
| Chimney crown repair | $750 – $1,500 |
| Chimney liner installation | $2,500 – $5,500 |
| Dryer vent cleaning | $120 – $250 |
The two things that push labor higher in Lomita are two-story rooflines, which many of the older tract homes have, and repairs on chimneys that need significant masonry prep before a cap or crown can be installed. We give you a price range by phone and confirm the exact number before any work begins, so you are not surprised by the invoice.
Neighborhoods We Serve in Lomita
We work across the entire 90717 zip code, from the older single-family blocks west of Narbonne Avenue to the newer townhome and apartment developments along Pacific Coast Highway. Our typical response time for Lomita is one to two business days for inspections and sweeps, with repair scheduling set once the scope is agreed.
- Lomita Terrace
- Delthorne area
- South Lomita (near the PCH corridor)
- Cypress neighborhoods near Lomita Park
- Malaga Dunes area
Service Area – Cities Near Lomita
We also cover the surrounding South Bay cities, where the housing stock and chimney conditions are often similar. If you are in Torrance, CA, Rolling Hills Estates, CA, West Carson, CA, or Manhattan Beach, CA, the same crew and the same material standards apply.
Serving Lomita, CA — Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Lomita
Most chimney sweeps, cap installations, and flashing repairs do not require a city permit. A full liner replacement or significant structural work may require one depending on the scope and current Los Angeles County building requirements. We can tell you what the job needs before any work is booked.
We schedule Lomita inspections and sweeps within one to two business days in most cases. Repair work is scheduled once we know the scope and the parts are on hand. Call (855) 341-9658 and we will give you a real estimate over the phone, not a vague window.
Yes. Because so many Lomita homes are of the same 1940s-to-1960s vintage, a pre-purchase chimney inspection is a sensible step. We will scope the flue, check the cap, crown, and flashing, and give you a clear report on what needs attention and what can wait. That is the same information a home inspector might flag, but with the camera footage to back it.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lomita Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Marcus Hampton"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Shannon Ziegler"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Roger Novak