Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Upland
Dryer vent cleaning in Upland typically runs $145 to $225 for a standard single-story home, and most jobs are done in under a hour. If you live in the foothill bungalows off Euclid Avenue or anywhere in the 91784, 91785, and 91786 zip codes, we’ll be out within a day or two of your call, often sooner. We know Upland’s housing stock, we know how the Santa Ana winds beat on the north side, and we know exactly what happens when a dryer vent hasn’t been touched since the house was framed. Call (855) 341-9658 for a straight quote with no inspection fee.
We’re Santa Ana Chimney Sweep, and we’re a full-service chimney and vent safety company. That matters because Upland homes rarely have just one vent problem. When we come out for a dryer vent, we look at the whole combustion-vent picture: the dryer exhaust, the chimney flue, the crown, the caps. You get one technician who can actually diagnose and fix what’s wrong, not a guy with a brush who tells you to call someone else for the repair.
Key Takeaways for Upland Homeowners
- Dryer vent cleaning in Upland costs $145 – $225 for most homes; foothill bungalows with long, kinked vent runs can run slightly higher.
- North-side 91784 homes built before 1960 often have vents routed through original plaster chases that crush, kink, and pack lint faster than newer construction.
- Wood-stove households in the foothills need the dryer vent and the flue checked together – creosote loading and lint loading both accelerate in the same burning season.
- We stock rigid DuraFlex vent sections and Olympia Chimney caps locally, so crushed-vent repairs don’t wait on a parts order.
- Estimates are free. Call (855) 341-9658 and we’ll give you a real number before we send anyone out.
Styles & brands we work with





Why Santa Ana Chimney Sweep Is Upland’s Dryer Vent Cleaning Company
We service Upland every week, and over the years our techs have learned the houses. The bungalows along Euclid Avenue and the streets running north of Foothill Blvd, the ranch homes below the San Gabriels, the newer tracts east toward the 210: each one has a different vent layout and different failure points. A tech who’s seen fifty Upland dryer vents knows to check the chase behind the laundry alcove before he even hooks up the vacuum. A tech who only works new construction doesn’t know that the vent on a 1930s bungalow may run twelve feet horizontally through a plaster wall before it reaches the roof.
Our crew is led by Allen Becerra, who built this company around a simple idea: name the materials you use, and explain why they matter. When we replace a crushed dryer vent section on a Upland foothill home, we use rigid DuraFlex, not the flimsy foil hose from a hardware store. When we put a new cap on a vent or flue, it’s an Olympia Chimney cap rated for exactly the wind conditions you get at the mountain base. That specificity is why Upland homeowners call us back for the chimney work too.
We’re not a directory of subcontractors. The tech who shows up is the tech who diagnoses the problem and does the repair. For a two-story Upland home with a vent run that goes up through a second-floor wall, that matters. You’re not waiting for a callback with a second opinion.
Our Dryer Vent Cleaning Services in Upland
Most Upland homes fall into one of three categories: original-hearth bungalows with wood or gas fireplaces, wood-stove foothill houses, or newer tract homes with factory-built gas inserts and laundry rooms on the second floor. The dryer vent problems in each are different, and we approach each one differently.
Dryer Vent Cleaning for Original-Hearth and Wood-Stove Homes
This is the bread-and-butter work we do in 91784 and the older pockets of 91786. These homes were built before dedicated dryer vent chases were standard, so the vent runs through original plaster and lathe, often with tight elbows behind the laundry alcove. Lint packs in those elbows. It forms a felt-like mat that restricts airflow until the dryer takes two full cycles to dry a standard load. We clean the entire run from dryer connection to exterior termination, and we open the wall access where needed to clear the packed sections. If the vent is crushed or kinked, we’ll tell you and show you before we replace it.

Chimney Crown Repair After Santa Ana Wind Damage
Upland sits at the base of the San Gabriel Mountains, and the Santa Ana winds that rake the foothills crack masonry crowns every season. A lifted or cracked crown lets water behind the brick face, and that water eventually finds its way into the flue and, in some layouts, the chase where the dryer vent also runs. When we’re on a north-side Upland roof for a dryer vent cleaning, we look at the chimney crown while we’re up there. If it needs resetting or sealing, we handle it the same day. HeatShield ceramic resurfacing gives us a documented repair option that’s far less invasive than a full rebuild, especially for Upland homes where the original brick is structural.

Cap and Flashing Inspection When a Vent or Flue Shows Draft Problems
A dryer vent that’s drawing poorly in Upland usually has one of three causes: packed lint, a crushed section, or a termination issue at the roof or exterior wall. We check the cap and flashing on every job because the wind at the mountain base is hard on sheet metal. A missing or lifted cap lets birds and nesting debris into the vent, and the hot, dry Santa Ana season accelerates rust at the flashing joints. We carry Olympia Chimney and Famco caps in our truck stock, so a damaged cap gets replaced during the same visit.

Whole-Home Vent and Flue Assessment
Because we do chimney sweeping and chimney repair alongside Dryer Vent Cleaning, we can give you a single assessment that covers everything that vents to the outside of your house. For a Upland homeowner burning a wood stove as primary heat, that means the dryer vent and the flue get the same level of attention during one visit. You’re not scheduling two companies and hoping they both show up.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service and Install in Upland
We don’t use whatever’s cheapest at the supply counter. For Upland’s foothill homes, where the Santa Anas stress every exterior metal component, we install rigid DuraFlex vent sections that hold their shape through plaster chases and don’t crush at the elbows. We cap with Olympia Chimney and Famco terminations rated for high-wind exposure. And for masonry flue restoration on the older 91784 bungalows, we’re HeatShield-certified, which means we can resurface a cracked flue liner from the inside rather than tearing out the original brick. The parts are professional grade because the conditions in Upland demand it. We keep a local stock for Upland jobs so a repair usually completes on the first visit.
Common Dryer Vent Cleaning Problems We See in Upland Homes
- Crushed vents in original plaster chases. In pre-war and mid-century bungalows across the north side, builders ran dryer vents through the same wall cavities as the plumbing. Fifty or eighty years of settling crushes the thin-walled original pipe. The dryer still runs, but it can’t push air. In Upland’s 91784 zip code, we pull and replace these runs with rigid DuraFlex on a regular basis.
- Wood-stove households with heavy lint and creosote loading. Homes that burn wood as primary heat in the foothill blocks tend to run the dryer more in the winter months, and the dryer vent is often part of the same air envelope that the wood stove is pulling from. Long, smoldering burns on damp wood load first-degree creosote fast, and if that creosote glazes, it won’t brush out. We check both.
- Santa Ana wind damage at exterior terminations. The downslope winds that hit the mountain base crack masonry crowns and lift flashing, but they also tear cheap vent hoods off the exterior wall. A missing vent hood on a north-side Upland home lets birds, rodents, and debris into the vent run. The fix is a proper Famco or Olympia cap with a tight seal, not a half-open flap.
- Long, flat vent runs in ranch homes. The 1950s and 1960s ranch houses in the middle of Upland often have dryer vents that run horizontally for ten feet or more before exiting. Airflow drops with every foot of horizontal run, and lint settles in the low spots. If your dryer takes two cycles and the vent exits near the ground on the side of the house, the whole run needs cleaning at least once a year, not every three.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Upland, CA
A standard dryer vent cleaning in Upland runs $145 to $225. That covers the full run from the dryer connection to the exterior termination, including lint removal, airflow verification, and a cap inspection. If the vent is crushed or kinked and needs a section replaced with rigid DuraFlex, the added material and labor usually brings the total to $275 to $400, depending on the length and access. Homes in 91784 with vents through plaster chases sometimes need wall access opened and patched, which adds $75 to $150. We give you a firm quote before any work starts, and the estimate is free. Call (855) 341-9658.
For reference, pricing in San Antonio Heights and Claremont runs about the same. Montclair and Rancho Cucamonga homes, which are mostly newer construction with dedicated vent chases, tend to run on the lower end. Upland’s older housing stock pushes the average up slightly, but not unfairly.
We Also Serve Cities Near Upland
Our service area covers Upland and the surrounding foothill and valley communities. We make regular runs to San Antonio Heights, Claremont, Montclair, and Rancho Cucamonga. If you’re just outside Upland and you’re not sure we cover your street, call (855) 341-9658 and we’ll tell you straight.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Upland
The most common cause in the 91784 foothill homes is a crushed or kinked vent behind the original plaster wall, followed closely by a packed lint mat at the elbow. Older bungalows off Euclid Avenue were built before dedicated dryer vent chases, so the vent runs through wooden framing with tight turns. Lint packs into those turns over time and airflow drops. We clean the full run and replace any crushed sections with rigid DuraFlex during the same visit. Call (855) 341-9658 for an exact quote.
For a Upland household burning wood as primary heat, we recommend the flue be swept every 30 to 40 burn days, which for most means once in early fall and once mid-winter, and the dryer vent cleaned at least once a year. The two systems share the same air envelope, and a wood stove pulling combustion air from the house can pull lint and fine dust toward the dryer vent as well. Long, smoldering burns on damp wood load first-degree creosote fast in foothill homes. We bundle the visits when we can. Call (855) 341-9658 and we’ll work out a schedule that fits your burning pattern.
Yes, and here’s how. In Upland’s foothill blocks, the same wind that lifts a chimney crown often tears a vent hood off the exterior wall or loosens the flashing where the dryer vent exits. A lifted crown also lets water into the wall cavity, and in older bungalows the dryer vent often runs through that same cavity. We inspect both the chimney crown and the dryer vent termination on every north-side Upland service call. If the crown needs resetting, we handle it on the spot. Call (855) 341-9658 for an assessment.
First-degree creosote is a dry, dusty, sooty residue that brushes off clean. Third-degree is a hard, glossy, tar-like glaze that a standard brush won’t remove. Homeowners can’t tell the difference by looking, and a wood stove that seems to draft fine can still have a dangerous tar load higher in the flue. If you’re burning a wood stove as primary heat in a Upland foothill home, that’s exactly the condition we look for on every sweep. When we find glazed creosote, we remove it with mechanical tools and a professional-grade treatment, and we talk you through burn practices that prevent it from coming back. Call (855) 341-9658 to book a sweep.
Yes, we service all of Upland including 91784, 91785, and 91786, and we don’t have a minimum job size. A single dryer vent cleaning in Upland is a complete service on its own. If you’re in the foothill blocks north of Foothill Blvd or down near the 210 on the south side, the response time is about the same. Call (855) 341-9658 and we’ll get you on the schedule.
Contact Santa Ana Chimney Sweep for Dryer Vent Cleaning in Upland
If your dryer is taking two cycles, or you haven’t had the vent cleaned in years, or you’re burning wood as primary heat in a Upland foothill home and you want the whole system checked before the cold nights set in, call us. We’ll give you a firm quote before any work starts, and we’ll show you exactly what we find. No camera evidence needed on our end to recommend work, but we do photograph everything so you see what we see. That’s how Allen Becerra runs it. Call (855) 341-9658 for your free estimate.
Written by Allen Becerra, Owner at Santa Ana Chimney Sweep, serving Upland since the company’s first year in the Inland Empire.