Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Westminster
Dryer vent cleaning in Westminster typically costs $149 – $289 for a standard single-story home, takes 45 – 90 minutes, and should be done every 12 – 18 months given our coastal air. We serve all three Westminster ZIP codes (92683, 92684, 92685) and reach most homes within 1 – 2 business days of your call. If your dryer takes longer than one cycle to dry a load, or you smell a musty, lint-heavy odor near the laundry area, call (855) 341-9658 and we’ll get you on the schedule.
Why Santa Ana Chimney Sweep Is Westminster’s Preferred Dryer Vent Cleaning Company
We’ve worked in hundreds of Westminster homes, from the dense single-story tracts off Bolsa Avenue to the newer east-side developments near the 405. What sets us apart is that we treat Dryer Vent Cleaning as a fire-safety service, not a quick vacuum job. Allen Becerra built this company around one principle: name the materials, explain the failure, and fix it the same visit.
Westminster homeowners call us because we understand what salt air and marine-layer damp do to vent terminations. Most dryer vent companies in Orange County clean the duct and leave. We inspect the entire vent path, including the exterior termination, the wall penetration, and any suspicious re-routing hidden behind drywall. When we find a galvanized cap corroded through from years of damp air, we replace it with stainless. When we find a dryer duct tied into an abandoned chimney flue from a 1980s remodel, we trace it, document it, and fix it. That’s the work most competitors never do.
Dryer vent cleaning is available as a standalone service or bundled with a chimney inspection. Homeowners near Westminster who use a fireplace seasonally often book both in one visit, since the same marine-layer conditions that rust vent caps also corrode chimney flashing.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Westminster
Dryer Vent Cleaning
We run rotary brushes and high-volume negative air through the full duct run, from the dryer connection to the exterior termination. In Westminster’s 1970s-80s tract homes, that run is often longer than it should be, with elbows and transitions that trap lint. We clear it all and measure airflow before and after so you know the job actually changed something.
Dryer Vent Termination Inspection
Westminster’s salt air is brutal on galvanized terminations. Screens rust through, flappers jam open, and rust drips down onto the duct connection below. We check every termination for corrosion, pest damage, and airflow restriction. If the cap is failing, we replace it with a stainless unit that won’t rust out in five years.
Dryer Vent Duct Tracing in Remodeled Homes
This is uniquely common in Westminster, especially in the Little Saigon corridor along Bolsa Avenue. During the 1980s and 1990s, many homeowners converted fireplaces to decorative niches, altars, or cooking vents. Some of those remodels tied dryer ducts into abandoned chimney flues, leaving a hidden path that no one has inspected in decades. We trace the actual route using camera inspection, show you what we find, and recommend the safest correction.
Dryer Vent Rerouting and Repair
When we find a duct that’s crushed behind drywall, disconnected in a wall cavity, or improperly tied into an old flue, we repair it. That means replacing damaged sections, re-supporting sagging runs, and bringing terminations up to current code. We stock rigid aluminum duct, stainless terminations, and proper connector hardware. Not foil tape over a gap, not plastic flex that collapses. Real materials, installed correctly.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westminster
We install and specify components from Famco, Olympia Chimney, and DuraFlex in Westminster. These are professional-grade parts you won’t find on a hardware-store shelf. Famco terminations and wall caps hold up to Westminster’s marine layer far better than cheap zinc or plastic. DuraFlex makes the rigid and semi-rigid aluminum duct we use when a vent needs to be re-routed or upsized. When we replace a rusted galvanized cap on a Bolsa Avenue tract home, we put a stainless Famco termination on it and the homeowner never thinks about it again. That’s the point. If you need parts quickly, we typically carry what Westminster homes need on the truck, so there’s no waiting on an online order.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Westminster Homes
- Rusted galvanized terminations on exterior walls. The marine layer south of the 405 keeps metal damp for months. Galvanized caps rust through, screens clog with lint, and airflow drops until the dryer overheats. We see this on nearly every older Westminster home we visit.
- Hidden dryer vent runs from 1980s remodels. In the older neighborhoods near Bolsa Avenue and Magnolia Street, owner-renovations walled over original flue chases or tied dryer ducts into abandoned chimney flues. These hidden paths collect lint in places no one can see until the duct is scoped.
- Bird and rodent nests in vent hoods. Westminster’s mild winters mean birds and rodents stay active all year. They build nests in vent terminations, especially on homes where the dryer is used infrequently. We remove the nest, clean the duct, and install a pest-resistant cap.
- Crushed or sagging flex duct. Flex duct pinned behind drywall or run through a floor joist gets crushed over time. That restricts airflow and collects lint at the pinch point. We replace crushed sections with rigid aluminum and re-support the run properly.
Pricing for Dryer Vent Cleaning in Westminster, CA
A standard dryer vent cleaning in Westminster runs $149 – $229 for a single-story home with a direct vent run under 15 feet. Two-story homes or runs longer than 15 feet typically cost $229 – $289 because access and equipment time increase. If we need to replace a corroded termination cap, add $65 – $120 depending on the cap style and whether it’s stainless or powder-coated. Duct tracing with a camera inspection for remodeled homes runs $99 – $150 as an add-on to cleaning. Every job gets a flat quote before we start, and the estimate is free. Call (855) 341-9658 and tell us what you’re seeing at the dryer, and we’ll give you a real number.
We Also Serve Cities Near Westminster
Our service area extends beyond Westminster to Midway City, Garden Grove, Stanton, and Huntington Beach. If you’re in one of those cities, the same team handles the work, and in many cases we can get to you just as quickly as a Westminster address.
Serving Westminster, CA — Our Local Coverage Area
We’re based in the Westminster area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Westminster
Because Westminster sits close enough to the coast that the marine layer keeps exterior metal damp for months at a time. Galvanized steel caps, especially the cheap ones installed by builders in the 1970s and 1980s, rust through in 5 – 10 years of that exposure. The fix is a stainless steel termination, which we stock and install as part of a standard vent cleaning. Call (855) 341-9658 if you’re seeing rust stains below the vent hood.
It’s more common in Westminster than almost anywhere else in Orange County. During the 1970s and 1980s, many homes along the Bolsa Avenue corridor had fireplaces walled over, converted to altars or decorative niches, or repurposed as cooking vents. Some of those remodels tied dryer ducts into the abandoned flue chase, leaving a hidden duct path no one has cleaned or inspected since. We can scope it with a camera, show you exactly where the duct goes, and recommend whether it needs to be re-routed. Call (855) 341-9658 to schedule an inspection.
Every 12 – 18 months for most Westminster homes. Our mild weather means dryers don’t run as heavily as they do in colder climates, but debris, pet hair, and pest intrusion accumulate year-round. Homes with long duct runs, multiple elbows, or hidden reroutes from old remodels should lean toward 12 months. If your dryer is taking two cycles to dry towels, don’t wait – book a cleaning now.
Salt air doesn’t typically corrode the interior aluminum duct, but it absolutely corrodes the exterior termination and any galvanized connectors at the wall penetration. Those components rust first, and the corrosion can drip onto and weaken the duct connection. Rigid aluminum duct holds up well; the weak points are almost always the cap and the penetration hardware. We replace those with stainless during a standard service call.
We install and specify Famco, Olympia Chimney, and DuraFlex components. Famco makes the stainless terminations and wall caps that hold up to Westminster’s salt air. DuraFlex supplies the rigid and semi-rigid aluminum duct we use for reroutes and repairs. We’d rather use a product we can name and stand behind than whatever generic part is cheapest that week. Call (855) 341-9658 for a free estimate.
Written by Allen Becerra, Owner at Santa Ana Chimney Sweep, serving Westminster since the company’s founding.