Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Redondo Beach
Dryer vent cleaning in Redondo Beach typically costs $149 – $289 and takes about 60 – 90 minutes for a standard single-story home. Our techs work throughout 90277 and 90278, from the bungalows near the Esplanade to the tract homes north of 190th Street. If lint is backing up, your dryer is running hot, or cycles are taking twice as long as they should, call (855) 341-9658 and we’ll get a camera down that vent to see what’s actually happening.
This page is written for Redondo Beach homeowners specifically, because the marine air here creates dryer vent problems you won’t see in Torrance or inland LA. Salt corrosion, rusted hoods, and damp lint packed tight inside galvanized ducting are the norm at the beach, and a standard cleaning that ignores those is half a job.
Why Santa Ana Chimney Sweep Is Redondo Beach’s Preferred Dryer Vent Cleaning Company
We’ve worked enough homes between Catalina Avenue and Artesia Boulevard to know what Redondo’s coastal air does to exhaust ducting. Galvanized pipe that would last 20 years in Riverside rusts through in under a decade within a mile of the water. Older bungalows in 90277 have duct runs that were installed decades ago, before modern building codes required smooth-wall metal, and many of them are thin, corroded, or crushed behind the wall.
Our Dryer Vent Cleaning team treats every Redondo Beach job as both a fire-safety call and a corrosion inspection. We don’t just vacuum the line and hand you a receipt. We scope it with a camera, check the exterior hood and damper, and flag anything that’s rusting, pinched, or pulling air from places it shouldn’t. Allen Becerra started this company to fix the problems other sweeps walk past, and that’s how every tech on the crew works.
If you’re in Redondo Beach and want a straight answer about whether your vent just needs cleaning or actually needs replacement, call (855) 341-9658. We’ll give you an honest read, backed by video you can see yourself.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Redondo Beach
Dryer Vent Cleaning
A standard cleaning in Redondo Beach runs $149 – $229 for a single dryer with a direct vent run to an exterior wall. Homes in 90277 with longer runs, multiple elbows, or roof terminations typically land in the $199 – $289 range. We clean from the dryer side and the exterior hood side, then verify airflow with a manometer and show you the before-and-after on camera. If the duct is old flex foil or vinyl, we’ll tell you plainly: that material can’t be properly cleaned, and coastal humidity turns the lint inside it into damp, sticky wads that trap more lint each cycle.
Dryer Vent Inspection
Not sure the vent actually needs cleaning? A camera inspection in Redondo Beach costs $89 – $129, and if you add a cleaning in the same visit, we knock the inspection fee off the total. We use a high-resolution push camera to check for crushed pipe, disconnected joints, rust-through, and pest nests. In the older 90277 beach bungalows near the Esplanade, we regularly find galvanized runs that have rusted thin enough to crush under limited foot traffic in the attic or crawlspace. The only way to confirm that without opening walls is a camera.
Dryer Vent Installation
If your existing duct is shot, we replace it with smooth-wall aluminum or stainless steel, depending on your location and budget. In Redondo Beach homes within about a mile of the water, stainless is the better call. Galvanized pipe starts showing red rust at the seams and screw holes after a few years in marine air. Smooth-wall aluminum is a solid mid-grade option, and it’s still far better than any flex or foil. New runs are sealed with foil tape, never sheet metal screws, and connected to a stainless-steel exterior hood with a backdraft damper. Expect $289 – $475 for a typical replacement, depending on run length and accessibility.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redondo Beach
When a duct or termination needs replacing, we stock and specify parts from Famco, Olympia Chimney, and Copperfield. Famco hoods and vent caps are made from either aluminum or stainless and are built to handle coastal conditions. Olympia Chimney makes dryer vent components we use regularly on rebuilds, and Copperfield galvanized and stainless pipe gives us heavy-wall options for longer runs. We’re not running to a big-box store for contractor-packs of thin flex. If it goes on a Redondo Beach home, it’s professional-grade material chosen for what the air off Santa Monica Bay does to metal.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Redondo Beach Homes
- Rusted-out hoods and backdraft dampers: Salt air seizes the damper flap, springs, and screws on galvanized exhaust hoods. The flap sticks partially open, letting moisture, salt fog, and birds into the duct. Lint then builds up behind the obstruction faster than a normal cleaning schedule can keep up with.
- Damp, sticky lint in old flex or vinyl ducting: The marine layer keeps Redondo Beach humidity high year-round, and lint inside a flex duct doesn’t dry out. It compacts into a paste-like layer that a shop-vac can’t pull. We cut out and replace flex foil and vinyl runs; there’s no cleaning method that makes them safe.
- Bird and insect nests in uncapped vents: The older 90277 bungalows along the Esplanade and Catalina corridor often have vent terminations that were never capped or have open hoods. Sparrows build nests in the duct throat, and the debris blocks airflow while creating a fire load directly in line with dryer exhaust. We’ve pulled out nests, lint, and debris that had been sitting for years.
- Crushed or pinched ducting behind walls: In 1950s-era 90278 ranch homes, original dryer duct runs sometimes pass under the floor joists or through notched studs. Decades of settling, plus rust-thinned pipe, can flatten a 4-inch duct to under 2 inches without an obvious sign from the laundry room. Your dryer still moves air, but it takes two cycles per load and the motor runs twice as many hours as it should.
Pricing for Dryer Vent Cleaning in Redondo Beach, CA
A straightforward dryer vent cleaning in Redondo Beach runs $149 – $229 for most single-story homes with a direct rear or side wall termination. If the vent terminates at the roof or runs over 20 feet, plan for $199 – $289. Camera inspection is $89 – $129 when bundled with a cleaning, or waived entirely on same-visit cleanings. If we find a failed duct, hood, or damper that needs replacement, we quote that work separately with photos and video so you can see the problem before approving anything. Call (855) 341-9658 for a free phone estimate with the details of your specific house.
We Also Serve Cities Near Redondo Beach
Our crew covers the whole South Bay and Palos Verdes peninsula. If you’re in Hermosa Beach, Palos Verdes Estates, Manhattan Beach, or Marina del Rey, the same salt-air conditions apply and the same inspection protocol matters. Check out more about our Redondo Beach service area or give us a call and we’ll confirm coverage for your address.
Serving Redondo Beach, CA — Our Local Coverage Area
We’re based in the Redondo Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Redondo Beach
Every 12 months is the right interval for most Redondo Beach homes. The NFPA and most dryer manufacturers recommend annual cleaning, but in a beach city the corrosion and damp-lint issues build faster than in dry inland areas. If you’re in 90277 within a mile of the water, don’t stretch it past a year. Call (855) 341-9658 and we’ll get you on the schedule.
Rusted-out galvanized hoods and crushed duct runs behind laundry walls. On a 1940s beach bungalow near the Esplanade, our tech found a 4-inch galvanized dryer duct behind the laundry wall so rust-thinned that a single step on the joist above pinched it nearly shut. We replaced the run with smooth-wall aluminum, added a stainless-steel exterior hood, and cleared a wad of lint and a dried bird nest. The homeowner told us the dryer had been taking two cycles to dry towels for months. That’s a typical Tuesday in 90277.
Yes, and that’s a bigger issue than many Redondo Beach homeowners expect. The hood, damper, and any exposed metal rust from coastal fog and salt spray whether the dryer runs or not. Annual inspection catches the rust before the flap seizes or the pipe corrodes through. Ignore it, and you’re paying for replacement rather than just cleaning. Call (855) 341-9658 to get it checked.
Always. Every cleaning starts with a camera inspection so we know what’s inside the duct before we start pulling debris. We record the before and after, and if there’s a corroded section, a pinched spot, or a nest, you’ll see it in the video. No guessing, no upsell you can’t verify.
Smooth-wall stainless steel is the best choice for homes near the water, because it resists the salt corrosion that eats galvanized pipe. Smooth-wall aluminum is a good, more budget-friendly option for inland parts of 90278, but we’d still use a stainless-steel hood and damper at the exterior. Avoid flex foil and vinyl entirely; they collect damp lint and can’t be cleaned effectively. Call (855) 341-9658 and we’ll quote the right material for your house and location.
Written by Allen Becerra, Owner at Santa Ana Chimney Sweep, serving Redondo Beach with dryer vent cleaning and full home vent safety since day one.