Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Newport Beach
Dryer vent cleaning in Newport Beach typically runs $140 – $225 for a standard single-story home, and we’re usually in your neighborhood within 24 to 48 hours of your call. We work the Balboa Peninsula, Balboa Island, Corona del Mar, Eastbluff, and every street in between. Our techs know exactly what a marine-layer August afternoon does to a vent run that’s been sitting half-clogged since March, and we’ll show you photo proof before we ever suggest a repair. Call (855) 341-9658 and we’ll give you a straight answer on what your dryer vent actually needs.
Key Takeaways
- Dryer vent cleaning in Newport Beach costs $140 – $225 for most single-story homes; two-story runs with complicated routing run $180 – $260.
- Salt-laden marine air from the Pacific corrodes vent terminations, dampers, and caps faster than inland Orange County sees.
- Many Balboa Island and Peninsula cottages route dryer vents through original brick chimney chases, which creates a specific failure mode we know how to diagnose.
- Every recommendation we make comes with camera photos. If we can’t show you the problem, we don’t ask you to fix it.
- We clean dryer vents as a standalone service or bundle them with a chimney inspection when you’re on our schedule anyway.
Styles & brands we work with
Why Santa Ana Chimney Sweep Is Newport Beach’s Preferred Dryer Vent Cleaning Company
Newport Beach homeowners don’t call us because they saw a billboard. They call because a neighbor on Lido Isle or a property manager in Irvine Terrace passed along our number after we handled a vent or chimney problem without the standard up-sell spiral. Allen Becerra built this company around a simple rule: the camera decides. If a dryer vent is clogged, we show you the clog. If a flue tile is cracked, we show you the crack. If the problem is actually salt-air spalling on exterior brick, we show you that too, and we tell you plainly that it’s a masonry issue, not a vent issue.
We carry parts and materials specific to what Newport Beach homes actually need, which means a rusted termination cap on a 1950s Balboa Island cottage doesn’t turn into a three-week waiting game. Our service area covers the 92660, 92661, 92662, and 92663 ZIP codes daily. We’re local enough to know which blocks on the Peninsula have original 1920s chimneys and which Eastbluff homes have newer prefab systems that vent builders sometimes routed in ways that make future cleanings needlessly difficult.
Our Dryer Vent Cleaning Services in Newport Beach
Dryer Vent Cleaning
The core service: we remove lint, debris, bird nesting material, and whatever else has accumulated in the full vent run from the dryer connection to the exterior termination. In Newport Beach, the biggest variable is routing. Original beach cottages on Balboa Island often have flexible duct runs that snake through old chimney chases or crawl spaces, and we’ll need to assess access before we quote. We remove the lint, inspect the duct condition, and document everything with photos. If the vent is short and accessible, you’re done quickly. If it’s a convoluted run through a remodeled cottage, we take the time to do it right without cutting corners or telling you it’s fine when it isn’t.
Level 2 Inspection
When a dryer vent terminates through or alongside a chimney flue, a standard visual check doesn’t tell you enough. Our Level 2 inspection sends a camera through the vent run and the chimney interior, capturing what’s actually happening inside. For Newport Beach properties with original clay-tile flues, this inspection regularly reveals gaps where old mortar has crumbled or where a previous remodel left a connection that shouldn’t be there. We provide the photos and walk you through them. You decide what gets fixed, with actual evidence in front of you.
Chimney Cap Replacement
Here’s where Newport Beach diverges from inland cities. Salt spray off the Pacific eats through galvanized and even some stainless caps within a few years. We replace rusted-out dampers and caps with professional-grade units from Olympia Chimney, Famco, and Copperfield. These aren’t big-box replacements; they’re the same brands we install on chimneys that face decades of coastal exposure. If your dryer vent terminates near a deteriorated cap, salt air and marine moisture can back-draft into the vent run, and replacing the cap often resolves the draft problem that was misdiagnosed elsewhere. Schedule your Dryer Vent Cleaning before the rainy months when that marine-layer moisture will do the most damage.
Dryer Vent Repair & Rerouting
Some older Newport Beach homes have dryer vents that should never have been routed the way they were. We see flexible ducts pinched behind remodeled walls, terminations pointed into carports, and vents secured with nothing more than duct tape and hope. When a vent run is beyond cleaning, we re-route it properly. We use rigid metal ducting, correct termination fittings, and materials that hold up to salt air. If the existing run passes through a chimney chase, we document the clearances and connection points so you can see exactly what’s behind the wall.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Newport Beach
We name the materials we use, and that’s not a marketing habit. It’s a supply-chain statement. When a Balboa Island cottage needs a new termination cap, we’re installing a Famco or Olympia Chimney unit, not whatever plastic cap was on sale at the home center. The same goes for dryer vent components: we use rigid metal ducting, proper vent clamps, and terminations that resist the kind of salt-air corrosion we see on nearly every Peninsula job. If a reline is needed, we’ve worked with DuraFlex systems to route around old, deteriorated flues without tearing out walls. It’s professional-grade parts, not hardware-store substitutes, because Newport Beach’s coastal environment punishes cheap materials within a couple of seasons.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Newport Beach Homes
- Salt-air spalling on brick chimneys that house vent terminations. A dryer vent terminating too close to a chimney crown lets moist marine air drift into the run. The brick sheds mortar and fine sand accumulates in the vent, mixing with lint to form a dense plug. This is a coastal-specific failure we see on the Peninsula, not something an inland tech would recognize.
- Flexible duct routed through original clay-tile flues. Balboa Island remodels often kept the 1940s chimney and ran the dryer duct through the flue to avoid cutting new exterior walls. Lint catches on rough tile edges, reduces draft, and builds up faster than it would in a smooth metal run.
- Rusted-out dampers and caps blocking the exit. Salt spray does the work here. When the damper rusts shut or the cap corrodes into a solid mass, the dryer can’t push air out, so lint recirculates into the laundry room. No amount of cleaning fixes that; the component has to be replaced.
- Double-wall chimney exteriors holding moisture. Older single-wythe brick chimneys on Balboa Island absorb salt-laden humidity. When a dryer vent runs through that same chase, the moisture migrates into the duct, and damp lint sticks to the interior walls. The vent clogs faster, and the duct rusts from the inside.
Pricing for Dryer Vent Cleaning in Newport Beach, CA
What You Can Expect to Pay
| Service | Typical Range in Newport Beach |
|---|---|
| Standard dryer vent cleaning (single-story, accessible vent) | $140 – $190 |
| Dryer vent cleaning, two-story home or long run | $180 – $260 |
| Level 2 inspection (camera through vent run and chimney flue) | $95 – $220, depending on scope |
| Chimney cap replacement (including standard parts) | $240 – $475, depending on cap type and height |
| Vent rerouting for improperly installed ducts | $350 – $650, quoted after camera assessment |
These are real ranges for Newport Beach, not nationwide averages. A simple, short vent on a single-level Eastbluff home will sit at the lower end. A 1920s cottage on the Peninsula with a duct routed through an old chimney chase will run higher because access and inspection take longer. Call (855) 341-9658 for a free estimate, and we’ll tell you before any appointment what the likely cost looks like.
We Also Serve Cities Near Newport Beach
Our service area extends beyond Newport Beach into the surrounding coastal and inland communities. We handle dryer vent cleaning and chimney work in Newport Beach, Costa Mesa, San Joaquin Hills, Fountain Valley, and Irvine on a regular basis. If you’re just over the city line, don’t hesitate to call; we’ll likely be in your area within the same week.
Serving Newport Beach, CA — Our Local Coverage Area
We’re based in the Newport Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Newport Beach
Because salt air and marine moisture make lint stick to the duct’s interior walls instead of blowing through. In Newport Beach, the repeated cycle of damp air entering a warm vent run creates a tacky film that traps particles. It’s a coastal-specific clogging pattern, and cleaning it requires removing not just the loose lint but also the adhered residue. Call (855) 341-9658 and we’ll show you what’s actually inside the vent.
Yes. We offer a combined appointment where we clean the dryer vent and conduct a chimney inspection in the same visit. This works especially well for Newport Beach homeowners who have both systems in the same chase or who want one crew on site instead of two. We’ll schedule both when you call and give you a single price for the combined visit.
Not always, and that’s where a camera inspection matters. Routing a dryer vent through an original chimney flue is common on Balboa Island and Peninsula remodels, but it creates lint accumulation points and can share space with combustion gases if the chimney is still active. We’ll verify the routing and clearances and show you whether it’s safe to operate or needs to be corrected. Call (855) 341-9658 for an inspection with photo documentation.
Every year, at minimum. In inland Orange County, we sometimes see vents that can go two or three years between cleanings. In Newport Beach, the combination of salt air, marine moisture, and older housing stock means annual cleaning is the safe interval. Some homes with long runs or original brick chases need it every 8 to 10 months. We’ll tell you after the first cleaning what your specific home needs.
Always. If we recommend a repair, reroute, or component replacement, you’ll see the photos that justify it. This is how Allen Becerra’s team has operated from the start: the camera is the authority, not our sales pitch. If we clean the vent and find nothing wrong, we’ll tell you that too, and we won’t invent a problem to pad the bill. Call (855) 341-9658 for a free estimate, and we’ll document everything.
Written by Allen Becerra, Owner at Santa Ana Chimney Sweep, serving Newport Beach’s coastal neighborhoods including Balboa Island, the Balboa Peninsula, Corona del Mar, and Eastbluff.